V-Line Industries Quick Vault Wall Safe

Hand gun wall safe.

The Quick Vault offers a variety of installation possibilities. Quick Vault can be flush mounted in between wall studs, mounted horizontally or vertically on top of most surfaces, or used as a free standing case.

The Quick Vault is designed to install in between standard wall studs. The Vault mounts flush with the wall’s surface enabling you to hang a picture over it for complete concealment. The outer bezel gives a clean finished look to hide the drywall cuts.

It is easy to install:

• Locate and mark studs (check desired wall location for wiring and plumbing);
• Measure and mark desired height location;
• Draw out level lines to cut wall 14" wide x 12" high;
• Cut drywall in between wall studs;
• Clean out opening of drywall dust;
• Slide Quick Vault into wall cut out;
• Pull back interior felt lining inside Quick Vault to locate installation holes. There are 2 on each side. Please note: The hinged side has 4 holes; the 2 non-threaded holes are for mounting;
• Pre-drill holes into studs for screws. Fasten lag screws through Quick Vault into stud. Minimum recomended screw size is 1/4" x 1". Screw sizes may vary depending on location;
• Set your personal combination, then hang a picture over it for concealment!

• Desk Mate Pistol Safe;
• Top Draw Pistol Safe;
• Hide-Away Pistol Safe;
• Compact Pistol Safe.

Features

• Five button mechanical Simplex lock allows quick and easy access.
• 3/8" thick steel lock block adds strength to lock.
• Anti-Pry Plates hold door securely.
• Felt Lined back and walls protect contents.
• Felt lined center shelf.
• Available in ivory color.
• This is a California-approved firearms safety device that meets the requirements of California Penal Code Section 12088 and the regulations issued thereunder.

Specifications

	Outside Dimensions	14" x 12" x 4"
	Inside Dimensions	13" x 11 1/4" x 2 1/8"
	Warranty	One year manufacturers warranty.
	Weight	About 23 pounds.

Other Images